Eaton Hydro-Line R5_A5 Tie-Rod Cylinder

    •    Bore diameters to 30”
    •    Stroke lengths to 300”
    •    Operating pressures to 10,000 psi or higher
    •    Operating media ranging from shop air to nitrogen, or from standard hydraulic fluid to special synthetic fluids
    •    Tie rod, threaded, and bolted cylinder construction
    •    Finite element analysis
    •    Application simulation in our testing laboratories

SKU: Eaton_Hydro-Line_R5_A5_Tie-Rod_Cylinder Category:

Description

•    R5 Specifications
    •    Bore Sizes: R5 – 1” through 20”
    •    Pressure R5, LR5 – 250 psi pneumatic – nominal
    •    Ratings: HR5 – See page 23 for specific pressure ratings and safety factors
    •    Temperature: -40°F to 200°F standard
    •    NFPA interchangeable mountings
    •    R5: Pneumatic cylinders incorporate a nitrile lip-type rod seal, nitrile double-lipped rod wiper, nitrile lip-type piston seals, .0003/.0005” thick chrome plated tube I.D., and NPTF ports.
    •    HR5: Hydraulic cylinders incorporate a urethane
    •    Ultra-Seal rod seal, nitrile double-lipped rod wiper, nitrile lip-type piston seals, .0003/.0005” thick chrome plated tube I.D., and SAE ports.
    •    LR5: Pneumatic cylinders incorporate all R5 features and are also permanently lubricated at assembly by filling the piston and rod seals “V” groove with molybdenum disulfide grease.


•    A5 Specifications
    •    Bore Sizes: A5 – 11/2” through 6”
    •    Pressure A5, LA5 – 250 psi pneumatic – nominal
    •    Ratings: HA5 – 400 psi hydraulic – nominal
    •    Temperature: -40°F to 200°F standard
    •    NFPA interchangeable mountings
    •    A5: Pneumatic cylinders incorporate a nitrile lip-type rod seal, nitrile double-lipped rod wiper, aluminum piston, nitrile lip-type piston seals, aluminum tubing with finished I.D., and NPTF ports.
    •    HA5: Hydraulic cylinders incorporate a urethane Ultra-Seal rod seal, nitrile double-lipped rod wiper, aluminum piston, nitrile lip-type piston seals, aluminum tubing with finished I.D., and SAE ports.
    •    LA5: Pneumatic cylinders incorporate all A5 features and and are also permanently lubricated at assembly by filling the piston and rod seals “V” groove with molybdenum disulfide grease.

Related products